Skip to main content

Ordering guide

What trim pieces does a metal building wall need?

Trim is the easiest part of a metal building order to get wrong, because every edge needs a piece and every piece has a name. Walk around the wall in your head, top to bottom and corner to corner, and list each one.

Updated October 1, 2026

The top of the wall

  • Side walls: eave trim, or a gutter if your building has gutters.
  • End walls: rake trim, running up each sloped edge from the eave to the ridge.

The bottom of the wall

Base trim runs along the bottom of every wall where the panels meet the slab, around the whole building except across door openings. It is the flashing; the base angle behind it is the member the panels screw to.

The corners

  • Outside corner trim at each of the four outside corners, from base to eave.
  • Inside corner trim anywhere the wall turns in, such as where a lean-to meets the main building.

Doors and windows

  • Two jamb trims per opening, one down each side.
  • One head trim across the top of each opening.
  • A drip edge or rain diverter where your drawings show one over a door.

Wainscot and tie-ins

  • A wainscot trim or drip edge where a wainscot meets the panels above.
  • Transition trim where a lean-to roof or a lower roof meets the wall.

Count the pieces

Add up the total length of each trim type, divide by the piece length (Steelium trim comes in 10-foot pieces) and round up. Allow for the laps where pieces join; your trim details show how much.

Trim is fastened with stitch screws or pop rivets in a matching color and sealed with urethane sealant at the laps, so add those to the list.

Your building's engineering documents govern sizes, gauges, spacing and connections. We supply parts to match them; we do not give engineering advice.

Questions

What is the difference between eave trim and rake trim?
Eave trim runs along the level roof edge at the top of the side walls. Rake trim runs up the sloped roof edge at the end walls.
Do I need base trim if I have base angle?
Yes. Base angle is the member the bottom of the panels screws to. Base trim is the flashing that covers the bottom edge and sheds water out.
Can trim be a different color from the panels?
Yes, and contrasting trim is common. Pick one color per trim type so the whole building matches.
Can you match an old trim shape?
Usually. Describe the old piece in the contact form (or email support@steeliumcomponents.com); we reply by email so you can send photos of it and its end profile, and we confirm the shape before anything is bent.
Cart (0)