Guides
Ordering guides
How to measure and order metal panels by length
How to measure roof and wall runs, work out sheet counts and cut lengths, and list metal panels on an order so they arrive cut right.
Read the guideHow to count screws and closures for a metal roof
Turn your building's fastening pattern into a screw count, then count foam closures and butyl tape for a metal roof, step by step.
Read the guideWhat trim pieces does a metal building wall need?
A walk-around checklist of the trim a metal building wall needs: eave, rake, base, corners, door and window trim, and how to count pieces.
Read the guide
framing
C vs Z Purlins: How to Tell Them Apart
Identify C and Z framing by their end shapes, compare the part marks, and gather the details needed for a replacement.
Read the guideHow to Find Purlins and Girts on Building Drawings
Find roof and wall framing pages, trace part marks to the parts list, and locate the details for the member you need.
Read the guideHow to Identify a Replacement Metal Building Girt
Map a damaged wall girt, collect its shape and connection information, and prepare a clear replacement request.
Read the guideHow to Identify an Eave Strut Before Ordering
Find the structural member at the roof edge and collect its shape, slope information, part mark, and connection details.
Read the guideHow to Measure a Steel Purlin
Measure an existing purlin's depth, flanges, lips, length, and holes, then compare your notes with its section drawing.
Read the guideWhat to Check When Purlin Holes Do Not Line Up
Compare part marks, reference ends, flange directions, and existing holes before changing a steel framing connection.
Read the guide
panels
Can You Put New Metal Panels Over an Old Metal Roof?
Compare overlay and removal by checking supports, moisture, roof edges, and the proposed attachment system before choosing panels.
Read the guideHow to Cut Metal Roofing Without Damaging the Finish
Choose a suitable cutting tool, mark a detached sheet, support the offcut, and remove metal chips without scratching the finish.
Read the guideHow to Decide Whether to Repair an Old Barn Roof
Map leaks, panel damage, and roof sections before choosing a focused repair or a larger roof replacement.
Read the guideHow to Match Old Metal Roof and Siding Colors
Find an old finish code, compare physical color samples, and judge a replacement against both faded and sheltered metal.
Read the guideHow to Match Old Metal Roof Panels
Measure ribs, photograph both panel edges, and trace a loose sample before choosing a replacement for an old metal roof.
Read the guideMetal Roofing Gauge: How to Read the Panel Spec
Understand gauge labels, base metal thickness, and coating measurements before comparing replacement metal roof panels.
Read the guideR-Panel vs PBR: How to Tell Them Apart
Compare R-panel and PBR side edges, identify the bearing leg, and confirm the exact profile before choosing replacement sheets.
Read the guide
doors
Door Slab vs Door Assembly: What Is Included?
Check whether a door listing includes the slab, frame, hinges, lock, seals, threshold, and fittings before choosing a replacement.
Read the guideHow to Check Walk Door Handing and Swing
Record your viewing side, hinge position, and opening direction, then match that record to the exact door's handing chart.
Read the guideHow to Measure an Existing Metal Building Walk Door
Keep door, frame, and opening measurements separate, record hinge and lock positions, and compare the results with replacement door details.
Read the guideJamb Trim vs Head Trim: How to Tell Them Apart
Separate door frame parts from wall trim, measure side and top shapes, and compare each with the correct door-junction detail.
Read the guide
additions
Headwall vs Sidewall Flashing: How to Tell Them Apart
Use the roof's downhill direction and panel ends to identify headwall or sidewall flashing before comparing trim details.
Read the guideHow to Inspect a Leaking Lean-To Roof Junction
Map indoor drips and photograph the roof-to-wall junction so a roofer can distinguish panel, flashing, and framing problems.
Read the guideHow to Order Panels for a Lean-To Roof
Keep existing-roof repairs and new lean-to panels on separate order lines, with clear profiles, cut lengths, and edge details.
Read the guideHow to Plan a Lean-To on a Metal Building
Map the site, gather existing-building records, and settle framing, drainage, and panel questions before ordering a lean-to.
Read the guide
ordering
How to Check a Metal Building Parts List
Check panel lengths, trim shapes, screw roles, closure faces, and tape with a practical worksheet, even without old building drawings.
Read the guideHow to Inspect Delivered Metal Panels and Trim
Compare panels and trim with the packing list, photograph damage, and separate missing items from parts you have not inspected yet.
Read the guideHow to Store Metal Roofing Panels Before Installation
Prepare a dry storage area, check bundles for moisture, and protect panel finishes before installation starts.
Read the guide
repair
How to Check Cut-Edge Rust on Metal Siding
Inspect a marked siding edge, take useful photos, identify the finish, and prepare clear questions before cleaning or replacing a panel.
Read the guideHow to Check Old Screw Holes in a Metal Roof
Map old metal roof screw holes, distinguish missing fasteners from unused holes, and choose the next repair step without guessing.
Read the guideHow to Choose a Replacement Metal Roof Panel
Match a damaged panel, measure its length, and list the adjoining trim, screws, closures, and tape before choosing its replacement.
Read the guideHow to Fix Leaking Metal Roof Screws
Find a leaking screw, inspect its washer and hole, fit a same-type replacement, and learn when an enlarged hole needs another repair.
Read the guideHow to Inspect a Rusted Metal Roof
Map rust marks, photograph panel and fastener condition, and gather the information needed to choose maintenance or replacement.
Read the guideHow to Remove Metal Shavings from Roof Panels
Remove loose metal shavings gently, follow the panel finish care guide, and know when stuck particles need a different cleaning method.
Read the guideHow to Track a Metal Roof Leak That Keeps Returning
Track repeated metal roof drips with dated notes, fixed locations, and useful photos so the next inspection tests the right questions.
Read the guideSide Lap vs End Lap: How to Tell Them Apart
Identify metal roof side laps and end laps from the panel direction, sketch the joint, and find the matching installation detail.
Read the guide
interior
How to Choose Base Trim for an Interior Metal Wall
Measure the floor-edge shape, record damp or damaged areas, and compare a base trim drawing with your interior metal wall.
Read the guideHow to Choose Interior Metal Wall Panels
Compare panel shape, wall use, finish, exposed edges, and service access before choosing metal panels for a shop interior.
Read the guideHow to Choose Trim Where a Metal Wall Meets a Ceiling
Compare an existing ceiling edge with the top of a metal wall, then make a junction card for choosing the right trim shape.
Read the guideHow to Measure Metal Inside Corner Trim
Record both legs, folded edges, finish direction, and the wall junction before choosing replacement metal inside corner trim.
Read the guideHow to Plan Interior Metal Wall Panel Trim
Draw an interior wall edge map, separate corners from openings, and keep service covers accessible before selecting metal trim.
Read the guideHow to Plan Metal Wall Panels Around Outlets
Map outlets, cabinets, pipes, and service covers before fitting interior metal panels, with clear questions for each trade.
Read the guide
trim
How to Choose Headwall Flashing for a Metal Roof
Identify a roof-to-wall junction, compare flashing shapes, and check wall drainage, closures, and end details before selecting parts.
Read the guideHow to Install Eave Trim on a Metal Roof
Fit eave trim at the low roof edge, check its relationship with panels and gutters, and prepare the parts in the right order.
Read the guideHow to Install Rake Trim on a Metal Roof
Identify the sloping roof edge, fit rake trim, prepare its eave and peak ends, and follow the panel guide for sealing and fastening.
Read the guideHow to Install Ridge Cap on a Metal Roof
Match the ridge cap and closures, lay out the peak, seal the required joints, and fasten the cap using your panel's installation guide.
Read the guideHow to Match Metal Building Gutters
Measure an existing gutter shape, compare its outlet and downspout, and prepare a clear replacement list without guessing drainage capacity.
Read the guideHow to Match Metal Roof Foam Closure Strips
Compare foam closure strips with a panel end shape, measure its ribs, and spot mismatches before choosing replacement closures.
Read the guideInside vs Outside Foam Closures: Which Do You Need?
Learn which way inside and outside closures face, compare their rib shapes, and choose the right foam strip for your panel.
Read the guideMetal Roof Trim Names: How to Identify Each Edge
Name eave trim, rake trim, and ridge cap from a ground view, then compare bends and measurements to choose a matching piece.
Read the guide
fasteners
How to Choose Metal Roofing Screws
Read screw labels, compare wood and metal points, and match the washer and fastener type to the connection on your roof.
Read the guideHow to Match Metal Roof Screw Colors
Compare screw heads with an old panel using finish codes and physical samples, without relying on a screen or a familiar color name.
Read the guideHow to Prepare Metal for Roofing Butyl Tape
Clean and inspect metal before applying roofing butyl tape, check the product instructions, and avoid sealing over dirt or loose paint.
Read the guideHow to Read Metal Roof Screw Sizes
Decode screw diameter, thread count, and length, then measure a spare screw without treating a sample size as a roof recommendation.
Read the guideHow to Spot Overdriven Metal Roof Screws
Recognize crushed, loose, and tilted sealing washers, take useful photos, and decide what needs adjustment or a screw replacement.
Read the guideHow to Use Butyl Tape on a Metal Roof
Prepare clean, dry metal faces, place butyl tape without stretching it, and close the right joint in the right order.
Read the guideMetal Roof Screws for Wood vs Steel: How to Choose
Identify the material under your panels, collect thickness and layer details, and compare the right screw family before selecting a part.
Read the guideRivets vs Stitch Screws: How to Choose for Metal Trim
Compare trim rivets and stitch screws by joint type, access, grip range, sealing needs, and the tools each connection requires.
Read the guideSelf-Drilling vs Self-Tapping: How to Tell Them Apart
Identify screw tips, understand drilling and tapping, and compare the label with the material your metal panel fastens to.
Read the guideStitch Screws vs Panel Screws: Which Do You Need?
Tell sheet-to-sheet stitch screws from panel-to-support screws, inspect the connection, and keep the two part selections separate.
Read the guide
siding
How to Install PBR Metal Siding on a Wall
Plan wall trim, establish a straight starting line, fit PBR sheets, and inspect joints using the exact panel installation guide.
Read the guideHow to Plan Metal Wainscot on a Building Wall
Plan a two-color lower wall with a clear transition line, separate panel records, and the correct joining detail before ordering.
Read the guideHow to Replace Damaged Metal Siding Panels
Map damaged sheets, match the panel edges, and plan removal and replacement without disturbing wall supports or bracing.
Read the guideVertical vs Horizontal Metal Siding: How to Choose
Compare rib direction, wall supports, panel joints, and trim before choosing vertical or horizontal metal siding.
Read the guide